Termination glass - red

Pros and cons:

What you need:

• mortar mixed with class 3.25 cement or our Vetromalta cement, made especially for glass blocks
• iron roxors for better stability and mechanical resistance
• spacers to create precise gaps between blocks

Manual:

1. Good mortar base

We start the assembly by preparing a good mortar base on the assembly surface. After the applied mortar has dried, we go to step two.

2. Place the blocks

Place the blocks on the laid foundation and join them with mortar from below and from the sides. As you place the individual glass blocks, be sure to separate them with spacers.

3. Insert roxors

We can now insert roxors between the individual blocks for better building stability. Roxors should not be more than 50cm apart. If possible, insert roxors horizontally, mounted on the side wall.

4. Assembly completion

Continue installing new rows according to steps 2 and 3, until the assembly is completed.

5. Finish the last details

When the construction is finished, you can remove excessive mortar and, if necessary, additionally fill the joints. Finally, peel off the protective foils from blocks and thoroughly clean the wall.

Video:

Pros and cons:

What you need:

• We will recommend you after a telephone or personal consultation

Manual:

1. Create an order on our e-shop

At checkout, do not forget to check the "I am interested in assembly" option and describe the construction details to us in the order notes.

2. Consultation and quote

After receiving your order, we will contact you by phone at the phone number specified in the order. We will communicate the details of the construction, recommend the most suitable solution and agree on the date and price of implementation.

3. Construction implementation

Professional installation by experts at the agreed time.