Tiles & pavers

The Marseille Tile is indicated in situations when you wish to allow the passage of light through a roof covering.
Its total or partial application , on one hand meets technical and functional requirements, i.e. the passage of light, and on the other it enables you to decorate the environment according to aesthetic taste, obtaining effects of transparency and luminosity even with roof tiling .
The Interlocking tile is available with a transparent finishing.

43,92€

Without tax: 35,70€

BG 1919/8 is a square glass block paver that has a high mechanical resistance (breakage and compressive strength resistance) and a good thermal insulation capacity .
Thanks to the glass design dotted on the surface, BG 1919/8 is ideal for horizontal surfaces where apart from the passage of light there is the desire to embellish the flooring with relief geometric decorations; moreover, in particular conditions the non-smooth surface may even increase friction.
For horizontal structures in which it is important to ensure the passage of light, and at the same time provide concealment so that the underlying part is not made totally visible, BG 1919/8 is available also with a satin finish on 1 side, as well as the transparent finish.
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

11,64€

Without tax: 9,46€

BG 1919/10 Clearview is a square glass block paver that has a high mechanical resistance (breakage and compressive strength resistance) and a good thermal insulation capacity .
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

24,06€

Without tax: 19,56€

BG 1919/8 Clearview is a square glass block paver that has a high mechanical resistance (breakage and compressive strenght resistance) and a good thermal insulation capacity .
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

21,53€

Without tax: 17,50€

BG 1919/8 is a square glass block paver that has a high mechanical resistance (breakage and compressive strength resistance) and a good thermal insulation capacity .
Thanks to the glass design dotted on the surface, BG 1919/8 is ideal for horizontal surfaces where apart from the passage of light there is the desire to embellish the flooring with relief geometric decorations; moreover, in particular conditions the non-smooth surface may even increase friction.
For horizontal structures in which it is important to ensure the passage of light, and at the same time provide concealment so that the underlying part is not made totally visible, BG 1919/8 is available also with a satin finish on 1 side, as well as the transparent finish.
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

19,84€

Without tax: 16,13€

Glass block BG 1919/8 30F, installed horizontally (with less than 15° inclination), provides a structure with a high mechanical resistance under the effect of flames, the propagation of fire, smoke and heat for 30 minutes (value F30 according to German regulation DIN 4102-3).
This class of resistance not only gives the structure stability and strength but also limits the passage of heat radiations thus also preventing objects placed in the environments protected by glass block walls from overheating.
Glass block BG 1919/8 30F is available in the smooth glass design and with three finishings (transparent, sand blasted on1 side or 2 sides) combining the need for safety with aesthetic values.
For their specific performance, F series blocks are used in buildings destined for public use (hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored.
In all these cases the horizontal installation of the fire resistant glass blocks must be done according to the indications given in the product certifications and it is essential to adopt all the strategies to guarantee the rapid evacuation of people in the case of fire.

44,65€

Without tax: 36,30€

B 1919/7 is a square half shell glass block with a thickness of 7 cm applicable to horizontal structures both for interiors and exteriors .
B 1919/7 is available in the glass design with concentric circles and a transparent finishing.
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

10,88€

Without tax: 8,84€

The BG 1919/16 60F glass block, installed horizontally (with less than 15° inclination), provides the structure with a high mechanical resistance, under the effect of flames, the propagation of fire, smoke and heat for 60 minutes (value F60 according to the German regulation DIN 4102-3).
This class of resistance not only gives the structure stability and strength but also limits the passage of heat radiations thus also preventing objects placed in the environments protected by glass block walls from overheating.
Glass block BG 1919/16 60F is available in the smooth glass design and with three finishings (transparent, sand blasted on1 side or 2 sides) combining the need for safety with aesthetic values.
For their specific performance, F series blocks are used in buildings destined for public use (hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored.
In all these cases the horizontal installation of the fire resistant glass blocks must be done according to the indications given in the product certifications and it is essential to adopt all the strategies to guarantee the rapid evacuation of people in the case of fire.

64,19€

Without tax: 52,18€

The BG 1919/16 90F glass block, installed horizontally (with less than 15° inclination), provides the structure with a high mechanical resistance, under the effect of flames, the propagation of fire, smoke and heat for 90 minutes (value F90 according to the German regulation DIN 4102-3).
This class of resistance not only gives the structure stability and strength but also limits the passage of heat radiations thus also preventing objects placed in the environments protected by glass block walls from overheating.
Glass block BG 1919/16 90F is available in the smooth glass design and with three finishings (transparent, sandblasted on1 side or 2 sides) combining the need for safety with aesthetic values.
For their specific performance, F series blocks are used in buildings destined for public use (hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored.
In all these cases the horizontal installation of the fire resistant glass blocks must be done according to the indications given in the product certifications and it is essential to adopt all the strategies to guarantee the rapid evacuation of people in the case of fire.

94,27€

Without tax: 76,64€

BG 1919/10 Clearview is a square glass block paver that has a high mechanical resistance (breakage and compressive strength resistance) and a good thermal insulation capacity .
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

20,69€

Without tax: 16,82€

B 1414/5 is a square half shell glass block with a thickness of 5 cm, applicable to horizontal structures both for interiors and for exteriors .
B 1414/5 is available in the glass design with concentric circles and a transparent finishing.
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

8,02€

Without tax: 6,52€

BG 1414/11 is a square glass block paver that has a high mechanical resistance (breakage and compressive strenght resistance) and a good thermal insulation capacity .
Thanks to the 11 cm thickness, panels made with BG 1414/11 can bear heavy structural loads .
BG 1414/11 is available in the glass design with concentric circles and a transparent finishing.
For the installation it is advisable to leave a space of at least 3 cm between the glass blocks.

13,19€

Without tax: 10,72€