Sound proofing

1919/8 Light Directing is the Technology Line glass block that enables the light beam to be oriented in specific directions - according to the way in which the blocks are installed - which avoids direct irradiation of light, thanks to the special prismatic structures they contain.
The Light Directing glass block, with a 63% light transmission value, is ideal especially in environments which require the minimization of direct light, orienting it towards specific points in the room, (e.g. the ceiling.)
For the values stated in the certifications to be valid, the glass blocks must be installed following the indications given in the certifications.

7,40€

Without tax: 6,16€

1919/8 Light Diffusing is the Technology Line glass block which allows light to be diffused producing homogeneous luminosity in its various inclinations, thanks to the special prismatic structures it contains
The Light Diffusing glass block with a 63% light transmission value, is ideal especially for environments which require the minimization of direct light in favour of diffused light.
For the values stated in the certifications to be valid, the glass blocks must be installed following the indications given in the certifications.

7,40€

Without tax: 6,16€

For applications that demand high safety standards the BSH20 series of glass blocks have been created, with a high mechanical resistance to the impact of bullets.
The BSH20 blocks are certified as bullet proof in class FB4 according to regulations DIN 52290-2 and EN 1522, and for this reason they are frequently used in "sensitive areas" such as cash dispensers in banks or prisons, and in all places where apart from the strength of the reinforced grid between the blocks, there must also be the certified strength of the glass blocks themselves.
The glass blocks belonging to this family are available in smooth and wavy glass designs and with three finishings (transparent, sand blasted on 1 side or 2 sides) as well as the Orsa glass design with a transparent finishing.

17,99€

Without tax: 14,99€

For applications that demand high safety standards the BSH20 series of glass blocks have been created, with a high mechanical resistance to the impact of bullets.
The BSH20 blocks are certified as bullet proof in class FB4 according to regulations DIN 52290-2 and EN 1522, and for this reason they are frequently used in "sensitive areas" such as cash dispensers in banks or prisons, and in all places where apart from the strength of the reinforced grid between the blocks, there must also be the certified strength of the glass blocks themselves.
The glass blocks belonging to this family are available in smooth and wavy glass designs and with three finishings (transparent, sand blasted on 1 side or 2 sides) as well as the Orsa glass design with a transparent finishing.

21,59€

Without tax: 17,99€

For applications that demand high safety standards the BSH20 series of glass blocks have been created, with a high mechanical resistance to the impact of bullets.
The BSH20 blocks are certified as bullet proof in class FB4 according to regulations DIN 52290-2 and EN 1522, and for this reason they are frequently used in "sensitive areas" such as cash dispensers in banks or prisons, and in all places where apart from the strength of the reinforced grid between the blocks, there must also be the certified strength of the glass blocks themselves.
The glass blocks belonging to this family are available in smooth and wavy glass designs and with three finishings (transparent, sand blasted on 1 side or 2 sides) as well as the Orsa glass design with a transparent finishing.

17,99€

Without tax: 14,99€

For applications that demand high safety standards the BSH20 series of glass blocks have been created, with a high mechanical resistance to the impact of bullets.
The BSH20 blocks are certified as bullet proof in class FB4 according to regulations DIN 52290-2 and EN 1522, and for this reason they are frequently used in "sensitive areas" such as cash dispensers in banks or prisons, and in all places where apart from the strength of the reinforced grid between the blocks, there must also be the certified strength of the glass blocks themselves.
The glass blocks belonging to this family are available in smooth and wavy glass designs and with three finishings (transparent, sand blasted on 1 side or 2 sides) as well as the Orsa glass design with a transparent finishing.

21,59€

Without tax: 17,99€

For applications that demand high safety standards the BSH20 series of glass blocks have been created, with a high mechanical resistance to the impact of bullets.
The BSH20 blocks are certified as bullet proof in class FB4 according to regulations DIN 52290-2 and EN 1522, and for this reason they are frequently used in "sensitive areas" such as cash dispensers in banks or prisons, and in all places where apart from the strength of the reinforced grid between the blocks, there must also be the certified strength of the glass blocks themselves.
The glass blocks belonging to this family are available in smooth and wavy glass designs and with three finishings (transparent, sand blasted on 1 side or 2 sides) as well as the Orsa glass design with a transparent finishing.

16,19€

Without tax: 13,49€

Glass block 1919/16 90F has a structure with high mechanical resistance to the action of flames, the propagation of fire, smoke and heat for 90 minutes (value F90 according to German norm DIN 4102-3).
This class of resistance not only gives the structure stability and strength but also limits the passage of heat radiations, thus also preventing the heating of objects placed in the environments protected by the glass blocks.
Glass block 1919/16 90F is available in the smooth glass design and with three finishings (transparent, sand blasted on 1 side or on 2 sides) combining safety requirements and aesthetic values.
Due to their specific performance, 1919/16 90F glass blocks are used in buildings destined for public use /hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored and/or handled.
In all these cases the vertical installation of fire-resistant glass blocks must be carried out following the indications in the product certifications and all necessary precautions must be taken to ensure the rapid evacuation of people in the case of fire.

69,80€

Without tax: 58,16€

Glass block 1919/16 90F has a structure with high mechanical resistance to the action of flames, the propagation of fire, smoke and heat for 90 minutes (value F90 according to German norm DIN 4102-3).
This class of resistance not only gives the structure stability and strength but also limits the passage of heat radiations, thus also preventing the heating of objects placed in the environments protected by the glass blocks.
Glass block 1919/16 90F is available in the smooth glass design and with three finishings (transparent, sand blasted on 1 side or on 2 sides) combining safety requirements and aesthetic values.
Due to their specific performance, 1919/16 90F glass blocks are used in buildings destined for public use /hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored and/or handled.
In all these cases the vertical installation of fire-resistant glass blocks must be carried out following the indications in the product certifications and all necessary precautions must be taken to ensure the rapid evacuation of people in the case of fire.

76,90€

Without tax: 64,08€

Glass block 1919/16 60F has a structure with high mechanical resistance to the action of flames, the propagation of fire, smoke and heat for 60 minutes (value F60 according to German norm DIN 4102-3).
This class of resistance gives the structure not only stability and strength but also limits the passage of heat radiations, thus also preventing the heating of objects placed in the environments protected by the glass blocks.
Glass block 1919/16 60F is available in the smooth glass design and with three finishings (transparent, sand blasted on 1 side or on 2 sides) combining safety requirements and aesthetic values.
Due to their specific performance, 1919/16 60F glass blocks are used in buildings destined for public use (hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored and/or handled.
In all these cases the vertical installation of fire-resistant glass blocks must be carried out following the indications in the product certifications and all necessary precautions must be taken to ensure the rapid evacuation of people in the case of fire.

56,90€

Without tax: 47,41€

Glass block 1919/16 60F has a structure with high mechanical resistance to the action of flames, the propagation of fire, smoke and heat for 60 minutes (value F60 according to German norm DIN 4102-3).
This class of resistance gives the structure not only stability and strength but also limits the passage of heat radiations, thus also preventing the heating of objects placed in the environments protected by the glass blocks.
Glass block 1919/16 60F is available in the smooth glass design and with three finishings (transparent, sand blasted on 1 side or on 2 sides) combining safety requirements and aesthetic values.
Due to their specific performance, 1919/16 60F glass blocks are used in buildings destined for public use (hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored and/or handled.
In all these cases the vertical installation of fire-resistant glass blocks must be carried out following the indications in the product certifications and all necessary precautions must be taken to ensure the rapid evacuation of people in the case of fire.

58,40€

Without tax: 48,66€

Glass block 1919/8 30F has a structure with high mechanical resistance to the action of flames, the propagation of fire, smoke and heat for 30 minutes (value El 30 according to European norm EN357 and F30 according to German norm DIN 4102-3).
This class of resistance gives the structure not only stability and strength but also limits the passage of heat radiations, thus also preventing the heating of objects placed in the environments protected by the glass blocks.
Glass block 1919/8 30F is available in the smooth glass design and with three finishings (transparent, sand blasted on 1 side or on 2 sides) combiningsafety requirements and aesthetic values.
Due to their specific performance, 1919/8 30F glass blocks are used in buildings destined for public use /hotels, schools, nursing homes, restaurants, cinemas, etc.) and in buildings where flammable or combustible materials are stored and/or handled.
In all these cases the vertical installation of fire-resistant glass blocks must be carried out following the indications in the product certifications and all necessary precautions must be taken to ensure the rapid evacuation of people in the case of fire.

28,40€

Without tax: 23,66€