Clear 1919/8 Wave Craftblock

Pros and cons:

What you need:

• mortar mixed with class 3.25 cement or our Vetromalta cement, made especially for glass blocks
• iron roxors for better stability and mechanical resistance
• spacers to create precise gaps between blocks

Manual:

1. Good mortar base

We start the assembly by preparing a good mortar base on the assembly surface. After the applied mortar has dried, we go to step two.

2. Place the blocks

Place the blocks on the laid foundation and join them with mortar from below and from the sides. As you place the individual glass blocks, be sure to separate them with spacers.

3. Insert roxors

We can now insert roxors between the individual blocks for better building stability. Roxors should not be more than 50cm apart. If possible, insert roxors horizontally, mounted on the side wall.

4. Assembly completion

Continue installing new rows according to steps 2 and 3, until the assembly is completed.

5. Finish the last details

When the construction is finished, you can remove excessive mortar and, if necessary, additionally fill the joints. Finally, peel off the protective foils from blocks and thoroughly clean the wall.

Video:

Pros and cons:

What you need:

• Vetroquick profiles
• Vetroquick crosses according to block type (Basic / Design)

Manual:

1. Prepare the surface

Make sure that the surface on which we will lay glass blocks is straight and cleaned of coarse dirt.

2. Make the base

We rip off one tip from the crosses so that it takes the shape of the letter T. We connect the profiles using modified crosses so that they describe the floor plan of the building area and then we screw them to the ground in the marked places.

3. Lay blocks

We lay the blocks so that there are profiles and crosses between them, according to the video below.

Video:

Pros and cons:

What you need:

• Vitralock system

Manual:

1. Prepare the surface

Make sure that the area on which we will build is level. If we are building next to a wall, the surface must form an angle of at least 90° with the wall.

2. Prepare the base

We connect the profiles using crosses so that they describe the floor plan of the building area. If necessary, we will adjust the crosses. Then we screw the base to the ground in the marked places.

3. Lay blocks

We lay the blocks so that there are profiles and crosses between them, according to the video below. To complete the construction, it is necessary to leave a space of at least 40 millimeters above the last row to insert the top row of profiles and crosses.

4. Grouting

Finally, we patch up the gaps between the blocks. You can use quick-drying mortar. If you are building in a humid environment, such as bathroom, we recommend using silicone instead.

5. Cleaning

We will clean the construction with a sponge. If we used quick-drying mortar, clean the structure with a moist cloth.

Video:

Pros and cons:

What you need:

• We will recommend you after a telephone or personal consultation

Manual:

1. Create an order on our e-shop

At checkout, do not forget to check the "I am interested in assembly" option and describe the construction details to us in the order notes.

2. Consultation and quote

After receiving your order, we will contact you by phone at the phone number specified in the order. We will communicate the details of the construction, recommend the most suitable solution and agree on the date and price of implementation.

3. Construction implementation

Professional installation by experts at the agreed time.